Fishing is one activity that has been around for as long as history itself, and would pretty much be around for as long as my mind can think of. It isn’t just something you do when you have mouths to feed, it has become a hobby; something we do to relax.
Fishing doesn’t always have to be stressful. You could fish just from the shores of the waters and you could also take out your watercraft, canoe, kayak or whatever it is, and head offshore to fish. When you fish offshore, you have the advantage of being able to explore the water while still having your own wonderful fishing experience.
However, one thing that gets tiring when you go fishing on a watercraft like a canoe is that you need to paddle to get anywhere. Except the water currents and the wind are going in the direction that you want, you would have to be doing a lot of paddling. Although paddling itself is a relaxing activity that also helps keep is fit, but let’s face it, not many of us are cut out for that.
But there is good news. Fishing has been around for a really long time and it isn’t likely that you have new problems that no one has encountered before. And for as for a replacement for paddling, trolling motors are the solution.
Table of Contents
A trolling motor is simply an electric motor that gets you around while your hands are either too tired to paddle or busy doing some other important stuff.
Trolling motors often come with a propeller that goes underneath your canoe. Electric voltage is used to power these propellers. The three most common voltages that the propellers are powered by are 12V, 24V and 36V.
Trolling motors are unlike an outboard engine whose power is measured in horsepower. The power of a trolling motor is measured in pounds of thrust. The higher the electric voltage powering the propeller, the better your propeller is in getting you through the water.
Trolling motors can either be electricity fueled with batteries or with gasoline.
This isn’t really meant to completely replace paddling. Rather, it is best used to complement paddling. But still, there are some really great advantages that come with mounting a trolling motor on your canoe.
The three main parts that make up the trolling motor are the motor, the propeller, and the controls.
This is the engine of your whole trolling motor. It is what powers your propeller. Its power is measured in volts, and the higher the voltage, the more power would be fed into your propeller to help push you around. Motors are kept in a waterproof compartment and before they go into the water so that they don’t overheat.
These are the blades that go into the water. The propellers work pretty much the same way as those of other watercraft like ships do. The propeller often has blades ranging from 2 to 4.
Of course, there must be a way to guide your ways. There are three types of controls that often come with the trolling motor; hand controls, foot controls, and wireless controls. These controls have their own advantages and disadvantages.
As it is with every other thing you want to buy, here are always things that you should consider before heading out to make the purchase of any particular trolling motor.
This is quite self-explanatory, isn’t it? The size of the canoe determines how powerful the motor would be. Already, the size of the canoe determines how much load the canoe can carry so the trolling motor definitely has to complement the size of the canoe.
I often advise people that they should use freshwater kits in saltwater. Saltwater easily corrodes your metal kits. So, kits that are made for the saltwater are coated with stuff that makes them resist corrosion.
Just like every other kit, your saltwater trolling motor propeller should be different from the freshwater trolling propeller.
The shaft of the motor should be long enough to be completely submerged in the water. Only then can it do its work properly. And on the other hand, the shaft length shouldn’t be too long because you don’t want it to be hitting the bottom of shallow water.
The powering voltage of your trolling motor should be considered. If your canoe is a big one and you always carry a lot of stuff with you when fishing or just exploring the water, you would need to mount a trolling motor that is powerful enough to get the job done.
Really, Old Town have been around for a long time and they are known for making reliable watercraft and their kits. In fact, they are a household brand when it comes to stuff like these.
The Standard Canoe Motor Mount is a really strong mount and is designed to hold both electricity fueled and gasoline-fueled trolling motors. The mount itself is made of aluminum which gives it a lightweight of just 6.9 pounds and can conveniently accommodate engines that have up to 3HP.
Another great thing is that this mount can be easily used by both southpaws and right-handed people because of its reversible orientation. Although Standard Canoe Motor Mount is made.specifially for Old Town Canoes, it is still versatile enough to fit in any other brand of canoe.
Pros
Here is another great trolling motor mount that can be found on the market today. The mount doesn’t take up much space and may not look like it, but it can support a trolling motor that weighs up to 35 pounds.
It is made with a heavy-duty anodized aluminum and hardwood oak that help it to be able to withstand just about anything. You don’t even need tools to attach it to your canoe as it has clamps that hold it to the body of your canoe securely. It also has reversible orientation for ease of use for both right-handed and left-handed people.
Pros
A mere glance at this mount would give away the fact that it is really durable. Mae with marine-grade alloy, stainless steel, and nylon clamps, there is almost no weight of trolling motor that this mount couldn’t take on.
Another feature that this mount has going for it is that it is adjustable to fit just about any hull width. The reversible orientation of the mount also makes it great for both right and left-handed users. Finally, the ease of installation and dismantling is another good thing that attracts a lot of people to it.
Pros
Of these three effective mounts, the Brocraft Canoe Trolling Motor Universal Mount is my pick, and for a good reason. Apart from the fact that this mount is a really tough one, it easily fits onto just about any kind of canoe. Also, this mount has a sleek look which totally works for me.
If you have any questions, enquires or further additions, please make sure to drop them all at the comments section below and I would be glad to attend to you.
kayaking in philadelphia is a great way to explore the city and its surrounding areas.…
Kayaking in Las Vegas is an exciting and unique way to explore the city. With…
kayaking in phoenix is a great way to explore the city and its surrounding areas.…
vest for kayaking is an essential piece of safety equipment for any kayaker. It provides…
kayaking with whales is an incredible experience that allows you to get up close and…
kayaking in tulsa is a great way to explore the city and its surrounding areas.…