We all know how frustrating it can be when you try to fish but you are already too tired from having to paddle all the way out to your fishing spot. This could really drain the enthusiasm and fun out of the fishing experience. That is why the use of a trolling motor is great as a complementary alternative to paddling.
Mounting a trolling motor is one thing that usually takes a lot of consideration and planning. If you do it right, you’re good to go, but if you don’t do it right, you may find out that the trolling motor is more a nuisance than a help. I’ll show you how to mount a trolling motor in this article.
But first, it is great to know what you would most likely enjoy using a trolling motor.
Table of Contents
This isn’t really meant to completely replace paddling. Rather, it is best used to complement paddling. But still, there are some really great advantages that come with mounting a trolling motor on your canoe.
The three main parts that make up the trolling motor are the motor, the propeller, and the controls.
This is the engine of your whole trolling motor. It is what powers your propeller. Its power is measured in volts, and the higher the voltage, the more power would be fed into your propeller to help push you around. Motors are kept in a waterproof compartment and before they go into the water so that they don’t overheat.
These are the blades that go into the water. The propellers work pretty much the same way as those of other watercraft like ships do. The propeller often has blades ranging from 2 to 4.
Of course, there must be a way to guide your ways. There are three types of controls that often come with the trolling motor; hand controls, foot controls, and wireless controls. These controls have their own advantages and disadvantages.
Hand Controls
Pros
Cons
Foot Controls
Pros
Cons
Wireless Controls
Pros
Cons
A trolling motor could be mounted on the stern or the bow of your canoe. For each of these two common positions, there are little differences in their mounting processes.
This is a really easy process provided you follow the right process.
In many DIY projects such as this, the thing that often comes first is measuring and marking. So here too, you first mark out the holes where your screws are to fit in while using your mount base as a guide. You can then drill the marked holes up to a quarter of an inch.
The next thing to do is to thread bolts into the base of your mount, put washers on the bolts and place the mount base in on the deck so that the bolts fit in the holes. Make sure that the mount is parallel to the deck before you finally secure the mount to the deck.
It is good practice to make sure that the trolling motor itself is about 6 to 12 inches underneath the water surface for maximum effectiveness. If you don’t place it deeply enough, the trolling motor would be making a lot of noise which could scare the fish away.
Mounting the motor on your stern is actually a really easy thing to do. In fact, it doesn’t require a lot of DIY skills to handle. You could also call a stern mounting a transom mounting.
All you have to do is to turn the clamps in an anticlockwise direction to open them. Next, you position the motor to be in the center of your stern to maximize its effectiveness before you finally turning the clamps in the clockwise direction to secure the motor.
Of course, you should try to make sure that the trolling motor sits deeply in the water. For transom motors, a depth of 9 to 10 inches underneath the water surface is good enough.
Hopefully, you do not just know how to mount your trolling motor, you now know a little more about trolling motors themselves. You know the things you stand to gain from using a trolling motor and you are able to choose what mounting position is most suitable for you.
If you have any questions, additions, inquiries or any other comments, please feel free to drop it in the comments section and I’d be eager to get back to you.
kayaking in philadelphia is a great way to explore the city and its surrounding areas.…
Kayaking in Las Vegas is an exciting and unique way to explore the city. With…
kayaking in phoenix is a great way to explore the city and its surrounding areas.…
vest for kayaking is an essential piece of safety equipment for any kayaker. It provides…
kayaking with whales is an incredible experience that allows you to get up close and…
kayaking in tulsa is a great way to explore the city and its surrounding areas.…